I have 2 new guns they are Traditions By Fausti, Field III Gold O/U. I am having trouble finding a Light modified choke tube for them. Anybody know of a choke tube company that makes that choke. I have tried Carlson, Briley,  and all the common ones. So it will have to be somebody basically unknown.......Bob

Bob, the Fausti chokes are compatible with the American Arms shotguns. So you might be able to purchase a LM made for that gun, or if one of the after-market choke companies makes chokes for American Arms, you could try try that. Don't forget about aftermarket companies such as  Rhino, Comp-N-Choke and Pure Gold. All have dedicated web sites that provide further contact info.

Also, chokes made for Lanber, Laurona Stoeger (Luger O/U version) and Tri-Star are also compatible with American Arms. Check out www.shotgunworks.com/content.aspx?c...okes_Guide for more info.

Hope this helps.

TB

Bob, Comp-N-Choke carries a choke for the American Arms 12 gauge guns. (Unsure if your Fausti is a 12 ga). These guns have a .725 bore diameter. They do carry the Light Modified chokes. You can order the choke in either stainless or blued finish. I have used the C-N-C tubes before in my sporting guns and found they do the job, but you do have to clean the slotted ports from time to time to reduce the fouling from the wad-stripping as the shotstring exits the muzzle as the slots strip the wad. This allows a more uniform and even pattern to develop earlier in the shotstring.  Check them out at www.comp-n-choke.com/Chokes.html or call them at 888-875-7906.

Carlson's has the LM choke in the Sporting Clays version (extended choke) for $34.50 + S & H. Check them out at www.choketube.com/american.html or call them at (785) 626-3700 or (785) 626-3078.

Good luck,

TB

That is just it, they all make them for 12 gauge. I shoot nothing but 20' and 28 gauges. Those 12 bore chokes don't work for me.......Bob

I ordered my Choke tube today. Trulock choke makes a 20 gauge Lt Mod. in their extended series. So I got one. Thank you for the help.....Bob